Start using Git on the command line
Git is an open-source distributed version control system designed to handle everything from small to very large projects with speed and efficiency. MLReef is built on top of Git.
While MLReef has a powerful user interface from which you can do a great amount of Git operations directly in the browser, you’ll eventually need to use Git through the command line for advanced tasks.
For example, if you need to fix complex merge conflicts, rebase branches, merge manually, or undo and roll back commits, you'll need to use Git from the command line and then push your changes to the remote server.
This guide will help you get started with Git through the command line and can be your reference for Git commands in the future. If you're only looking for a quick reference of Git commands, you can download the very usefull Git Cheat Sheet from GitLab.
TIP: Tip: To help you visualize what you're doing locally, there are Git GUI apps you can install.
You don't need a MLReef account to use Git locally, but for the purpose of this guide we recommend registering and signing into your account before starting. Some commands need a connection between the files in your computer and their version on a remote server.
To execute Git commands in your computer, you'll need to open a command shell (also known as command prompt, terminal, and command line) of your preference. Here are some suggestions:
- For macOS users:
- For Windows users:
- For Linux users:
- Built-in: Linux Terminal.
Open a command shell and run the following command to check if Git is already installed in your computer:
If you have Git installed, the output will be:
git version X.Y.Z
If your computer doesn't recognize
git as a command, you'll need to install Git.
After that, run
git --version again to verify whether it was correctly installed.
To start using Git from your computer, you'll need to enter your credentials (user name and email) to identify you as the author of your work. The user name and email should match the ones you're using on MLReef.
In your shell, add your user name:
git config --global user.name "your_username"
And your email address:
git config --global user.email "email@example.com"
To check the configuration, run:
git config --global --list
--global option tells Git to always use this information for anything you do on your system.
If you omit
--global or use
--local, the configuration will be applied only to the current
You can read more on how Git manages configurations in the Git Config documentation.
Basic Git commands
Start using Git via the command line with the most basic commands as described below.
Initialize a local directory for Git version control
If you have an existing local directory that you want to initialize for version
control, use the
init command to instruct Git to begin tracking the directory:
This creates a
.git directory that contains the Git configuration files.
Clone a repository
To start working locally on an existing remote repository, clone it with the command
git clone <repository path>. By cloning a repository, you'll download a copy of its
files to your local computer, automatically preserving the Git connection with the
You can either clone it via HTTPS or SSH. If you chose to clone it via HTTPS, you'll have to enter your credentials every time you pull and push. You can read more about credential storage in the Git Credentials documentation. With SSH, you enter your credentials only once.
You can find both paths (HTTPS and SSH) by navigating to your project's landing page and clicking Clone. MLReef will prompt you with both paths, from which you can copy and paste in your command line.
As an example, consider this repository path:
To get started, open a terminal window in the directory you wish to clone the
repository files into, and run one of the
git clone commands as described below.
Both commands will download a copy of the files in a folder named after the project's name. You can then navigate to the new directory and start working on it locally.
Clone via HTTPS
https://mlreef.com/mlreef/mlreef.git via HTTPS:
git clone https://mlreef.com/mlreef/mlreef.git.git
You'll have to add your password every time you clone through HTTPS.
On Windows, if you entered incorrect passwords multiple times and MLReef is responding
you may have to add your namespace (user name or group name) to clone through HTTPS:
git clone https://firstname.lastname@example.org/mlreef/mlreef.git.
Clone via SSH
email@example.com:mlreef/mlreef.git via SSH:
git clone firstname.lastname@example.org:mlreef/mlreef.git.git
Switch to the master branch
You are always in a branch when working with Git. The main branch is the master
branch, but you can use the same command to switch to a different branch by
master to the branch name.
git checkout master
Download the latest changes in the project
To work on an up-to-date copy of the project (it is important to do this every time
you start working on a project), you
pull to get all the changes made by users
since the last time you cloned or pulled the project. Use
master for the
<name-of-branch> to get the main branch code, or the branch name of the branch
you are currently working in.
git pull <REMOTE> <name-of-branch>
When you clone a repository,
REMOTE is typically
origin. This is where the
repository was cloned from, and it indicates the SSH or HTTPS URL of the repository
on the remote server.
<name-of-branch> is usually
master, but it may be any
existing branch. You can create additional named remotes and branches as necessary.
You can learn more on how Git manages remote repositories in the Git Remote documentation.
View your remote repositories
To view your remote repositories, type:
git remote -v
-v flag stands for verbose.
Add a remote repository
To add a link to a remote repository:
git remote add <source-name> <repository-path>
You'll use this source name every time you push changes to mlreef.com, so use something easy to remember and type.
Create a branch
To create a new branch, to work from without affecting the
master branch, type
the following (spaces won't be recognized in the branch name, so you will need to
use a hyphen or underscore):
git checkout -b <name-of-branch>
Work on an existing branch
To switch to an existing branch, so you can work on it:
git checkout <name-of-branch>
View the changes you've made
It's important to be aware of what's happening and the status of your changes. When you add, change, or delete files/folders, Git knows about it. To check the status of your changes:
To view the differences between your local, unstaged changes and the repository versions that you cloned or pulled, type:
Add and commit local changes
You'll see any local changes in red when you type
git status. These changes may
be new, modified, or deleted files/folders. Use
git add to first stage (prepare)
a local file/folder for committing. Then use
git commit to commit (save) the staged
git add <file-name OR folder-name> git commit -m "COMMENT TO DESCRIBE THE INTENTION OF THE COMMIT"
Add all changes to commit
To add and commit (save) all local changes quickly:
git add . git commit -m "COMMENT TO DESCRIBE THE INTENTION OF THE COMMIT"
. character means all file changes in the current directory and all subdirectories.
Send changes to MLReef.com
To push all local commits (saved changes) to the remote repository:
git push <remote> <name-of-branch>
For example, to push your local commits to the
master branch of the
git push origin master
Delete all changes in the branch
To delete all local changes in the branch that have not been added to the staging area, and leave unstaged files/folders, type:
git checkout .
Note that this removes changes to files, not the files themselves.
Unstage all changes that have been added to the staging area
To undo the most recently added, but not committed, changes to files/folders:
git reset .
Undo most recent commit
To undo the most recent commit, type:
git reset HEAD~1
This leaves the changed files and folders unstaged in your local repository.
CAUTION: Warning: A Git commit should not usually be reversed, particularly if you already pushed it to the remote repository. Although you can undo a commit, the best option is to avoid the situation altogether by working carefully.
Merge a branch with master branch
When you are ready to make all the changes in a branch a permanent addition to
the master branch, you
merge the two together:
git checkout <name-of-branch> git merge master